Discharge (m³/s)
Also: flow, flow rate, m³/s, cubic metres per second, MQ
Discharge tells you how much water flows past a gauging station per second, given in cubic metres per second (m³/s).
The gauge level in centimetres only tells you how high the water is at that particular gauge board. Discharge, on the other hand, describes the actual amount of water and is therefore often more meaningful. Many river descriptions give a minimum and a maximum value in m³/s between which a section is good to run.
The statistical parameters that many gauge services also provide are helpful: MNQ (mean low-water discharge), MQ (mean discharge) and MHQ (mean flood discharge). If the current value is well above MQ, the river is faster, more powerful and colder than usual.
Warning: Even a doubling of the discharge can turn a gentle river into a serious whitewater run. Always compare the current value with the guide value from your river guide.
Sources and further reading
Research as of 13 Nov 2026. We have marked manufacturer information as such.