Repair and care

Pressure test (checking for leaks)

Also: leak test, tightness test, checking for air loss

For a pressure test you inflate the boat firmly and leave it for several hours or overnight. If it loses a noticeable amount of air, you search specifically for the leak.

A constant temperature is important: a boat inflated in the evening in a warm flat will seem soft on a cool morning without leaking. So test in the same room and compare at the same time of day.

A slight loss of pressure over several days is normal. But if the boat becomes noticeably soft within a few hours, spray soapy water onto seams, valve and suspicious spots: where bubbles form, air is escaping.

Tip: Do the pressure test before the season and after every repair. That way you notice a problem at home and not at the put-in.

Matching gear

Advertising: This page contains affiliate links (marked with *). If you buy through them, we earn a commission at no extra cost to you.

Anfibio HandPump* (advertising, external link, opens in a new window)

Sources and further reading

Research as of 13 Nov 2026. We have marked manufacturer information as such.

WhatsApp